D&C Diesel Injector pump Parts for Ford Tractors

 DPATCG--------------------------------------------------------------------------$9.95    Throtle shaft, shut off shaft and top cover gasket for models with CAV, Roto Diesel or Lucas Pumps

 DPA Cover nut and Stud 

 252U Seal-----------------------------------------------------------------------$7.50

Drive end seal for models fitted with CAV, and Lucas injector pumps

 7135-110 Gasket Set--------------------------------------------------------$24.99  Basic Seal Kit to fit DPA pumps can also be listed as 7135-70

7180-57 -DPA Cover w/return -----------------------------------------$36.00

Shown is the 7139-748A which is made with aluminum the 7180-57 is made from pressed steel and is the one we stock, includes gasket.

900 Solenoid---------------------------------------------------------$36.00

Will fit units equiped with the Lucas, CAV, Delphi or Roto Diesel Pumps. When ordering choose from the following, if your solenoid has

900W------------1 wire, fastened by a nut, screwe or one spade

900T-------------2 wire with mid sized terminals about 1/4 inch wide

900G-------------2 wire with small spades 1/8 or less in width. 

**Ford DPA 3 cylinder rotary injection pump----------------------------$485 

This pump has been totally reconditioned to factory specifications and will have a new head and rotor assembly installed, Warranty period is for 1 year from delivery date and will cover anything but return shipping and a seized head and rotor. Please be sure to check the model you have, if yours is not listed please advise us through e-mail or phone. This is for all 2 plunger models that have one return out the side, and the other out of the top cover on the back side. Fits 2600, 3000, 3600, 4000, 4100, and 4600

This item will ship free UPS Ground, we will enclose a "RS" Return Shipping Label for you to return your old pump.

As you will notice some of the models can use two different nozzles it may depend on the pump or engine used,  if there is a question about which one is correct for your application you may want to first look at the nozzle you are replacing, choose the number that matches. If yours has different numbers it may have been replaced, or may have the wrong nozzles in it. Obtain your Tractor and engine model, injector pump number and type then give us a call. 

  BDLL150S6774 Tip------------------------------------------------$22.53

Fits Models listed below